Commercial property: lettable areas and space management on a reliable basis
In commercial letting, the area is the price. If the figure stated in the lease differs from the actual one, money is immediately at stake, and retroactively at that. We measure the areas according to the guideline stated in the lease and supply the drawing that makes the figure traceable.

Lettable area is a figure with consequences
In commercial property, the lease depends on the area. If the contractual area differs from the actual one, that is not a cosmetic flaw but a claim.
We measure the lettable areas, document the method and deliver the result in a way that keeps it traceable — as a room book and as a plan.

Where it goes wrong
The areas of a commercial property often come from several sources: the building file, an old letting document, a spreadsheet kept by the property management. As soon as a tenant re-measures or a buyer checks, the discrepancies come to light. They are usually small, but they affect every square metre over the entire term of the lease.
The second point is allocation. A lettable area does not consist only of what lies behind the front door of the unit, but of rental areas, common areas and an apportionment key. Without clean room polygons, this calculation cannot be made and cannot be kept up to date in space management.
When the need arises
- New letting or re-letting of part of a building
- Acquisition due diligence, when the seller’s area figures have to be verified
- Conversion of a floor and the reallocation of rental areas
- Introduction or replacement of a space management system
- Discrepancy between the contractual area and the tenant’s re-measurement
How we capture
We capture office buildings with mobile mapping, using a NavVis VLX. In practice we cover 3,000 to 6,000 square metres a day, depending on how finely the floor is subdivided. Capture takes place during normal operation; for the staff on site, it is just someone walking down the corridor.
From the point cloud we form room polygons and calculate the areas from them. Which guideline applies is clarified beforehand: gif MF/G for commercial lettable areas, DIN 277 for floor areas, and in mixed-use properties both side by side.
What you receive
- Lettable area schedule to gif MF/G, separated into rental area and common area
- Floor areas to DIN 277 with BGF, NRF and NUF per storey
- Floor plans as DWG with room polygons and room stamps
- Room book with type of use, finishes and clear height
- Virtual tour for the property brochure and for remote viewings
The room polygons are the part that matters later: they are the link between drawing and area calculation and can be transferred into a CAFM system without anyone having to enter the areas there again.
How the lettable area is derived
The path from capture to the figure in the lease has four steps, and each involves a decision.
- Form room polygons. The point cloud is turned into closed areas. Without them there is no area, only a drawing.
- Allocate. Each area belongs to a rental unit, to the common areas or to the building. This allocation is the actual core and not a measurement.
- Calculate floor areas to DIN 277, as the raw material for everything else.
- Derive lettable areas to MF-GIF, including the apportionment key for the common areas.
The schedule belongs in the lease together with the plan. An area figure without the drawing it is based on cannot be verified – and for exactly that reason it is open to challenge in a dispute.
Why lettable areas change without any construction
One point that regularly surprises people in practice: a tenant’s lettable area consists of their own area plus a share of the common areas. The share depends on the ratio of exclusively used areas in the building.
If a neighbour moves out and their area is divided differently, this share shifts – for all other tenants, without anything having happened to their areas. Anyone who does not anticipate this will be working with figures that are no longer correct after the first change of tenant.
That is why the capture is not a one-off survey but the basis on which recalculation is possible. With room polygons and allocation in place, a recalculation after a change of tenant is an arithmetic exercise. Without them, it is a second project.
Further reading
- MF-GIF – how commercial lettable areas are calculated
- DIN 277 – BGF, NRF and NUF in building construction
- CAFM data foundation – the data that space management runs on
- Room stamp – the labelling the CAFM system hooks into
- Room book – the attributes per room
- Virtual tours – viewings without travelling
- For facility management – the entry point for operations
Frequently asked questions
Which guideline do you use to calculate the lettable area?
The one stated in the lease. In commercial letting this is usually gif MF/G. If the lease says nothing, we propose gif MF/G and additionally report the floor areas to DIN 277.
Does the capture disrupt office operations?
Hardly. Mobile mapping captures while walking, without a tripod and without cordoning off areas. Workstations do not need to be cleared.
How fast is it?
In office buildings we expect 3,000 to 6,000 square metres a day. Finely subdivided floor plans with many individual offices are at the lower end, open-plan areas at the upper end.
Do we also receive the areas as a list?
Yes. The schedule comes as an Excel file, linkable via the room number to the polygons in the drawing.
Can you check an existing area schedule?
Yes. We measure independently and set out the discrepancy room by room. This is the usual approach when a tenant’s re-measurement is under discussion.